Elevate Construction official logo
Contact us

Month: September 2026

Lean Onboarding Series – Takt, Last Planner, Scrum, & CPM

Posted on by Team Jason Schroeder
Read 9 min

Four Terms, One Question: Does the Work Flow?

Anyone new to a construction project site will hear these four terms constantly: Takt, Last Planner, Scrum, and CPM. Each one ultimately answers the same underlying question in a different way: is the work actually flowing, moving at a consistent pace and consistent spacing from trade to trade, or is it scattered, stacked, and out of sequence.

The Real Pain: Jargon Without Understanding

The real pain is that these terms often get used constantly on a project site without anyone ever clearly explaining what they mean or what to actually do with them. That gap leaves new workers, and sometimes even experienced foremen, feeling confused or intimidated rather than genuinely equipped to participate in real planning conversations.

Takt Plan or Master Schedule: The One-Page Picture of Where Everyone Should Be

A Takt plan, sometimes simply called the master schedule, is a colorful, typically one-page visual showing every trade moving from zone to zone on a consistent time beat, the same speed and the same distance apart, all heading in a common direction. Reading one is straightforward once you know what to look for: reference the columns for time and the rows for zone or area, and find your trade’s specific color to see exactly when and where you are supposed to be working.

Last Planner System: Letting the People Doing the Work Help Plan It

The term “last planner” refers specifically to the last person in the planning cycle, typically the foreman or lead person actually closest to the work itself. The Last Planner System is a collaborative process that takes the milestones from the master schedule and works directly with foremen, lead persons, and trade superintendents to confirm the real, practical sequence of work, rather than having a general contractor simply hand down a schedule without any real input from the people executing it.

That collaboration typically flows from the master schedule’s milestones, into a jointly coordinated weekly work plan created with all trades on the project, into daily execution and tracking of that plan. The entire point is genuinely valuing the frontline wisdom of the people actually doing the work, rather than working from what amounts to an unrealistic schedule built without their input.

Scrum: How the Office Clears the Path for the Field

Scrum is a scheduling and prioritization system, often visualized on a board with three columns: to do, doing, and done. It gets used primarily by office staff to track and prioritize the tasks the field genuinely needs completed to keep moving, RFI answers, submittal reviews, resolved roadblocks, and other information. Rather than office work becoming an invisible bottleneck, Scrum makes those priorities visible and keeps the office team focused on exactly what the field needs next.

A few quick reference points make it easier to recognize and read a Takt plan at a glance:

  • Time typically runs along the columns, so scanning left to right shows how the schedule progresses.
  • Zones or areas typically run along the rows, showing exactly where each piece of work is happening.
  • Each trade is usually assigned a distinct color, making it easy to trace a single trade’s path through the entire schedule.

CPM: Useful at a High Level, Dangerous in the Details

CPM, or Critical Path Method, is a scheduling system that networks activities together in specialized software, logically tying the start or end of one activity to another, and calculating the longest connected path of activities, the actual critical path. It genuinely can work well as a high-level, summarized schedule organized by project phase. It is generally not well suited to detailed, day-to-day field planning.

Here is the critical warning worth carrying directly: if a project uses CPM as its master schedule, it becomes essential to verify that the schedule is not quietly allowing trades to stack into multiple areas at the same time. Regardless of which scheduling system is technically in charge, real flow between zones, consistent pace, consistent spacing, still has to be actively protected. Focusing purely on the critical path while ignoring whether trades are actually flowing from area to area defeats the purpose entirely.

Why It Matters: Raise Your Hand Before Work Stops

This matters because every one of these systems exists to serve the same practical goal, and every single person on a project, regardless of role, has a genuine part to play in making it work. Look ahead honestly, a day, a week, two weeks, even six weeks, at whatever work has been committed to by your foreman or lead person, and ask directly whether you actually have the tools, equipment, materials, information, and layout needed to carry it out.

If the answer is no, raise your hand. That gap becomes a roadblock the team can actually solve together, with your lead person, your foreman, and the broader project team, well before it forces an actual stop in the work. Staying quiet about a missing resource does not protect flow, it just delays the moment the problem becomes impossible to ignore.

Teach the Framework: The Five Habits That Actually Create Flow

Regardless of which scheduling system a project uses, flow itself gets created through a consistent set of habits: working one process at a time, moving through zones with a consistent crew composition, installing work correctly the first time rather than requiring rework, actively preventing roadblocks and the stops and restarts they cause, and genuinely finishing work as you go rather than leaving it partially complete.

A few of these habits are worth committing to directly, since they apply regardless of whether a project runs on Takt, Last Planner, Scrum, or CPM:

  • Work one process at a time, rather than jumping between multiple tasks simultaneously.
  • Keep crew composition consistent as you move from zone to zone, rather than constantly reshuffling who is doing what.
  • Finish work completely before moving on, rather than leaving partial tasks behind to revisit later.

Turning This Into Daily Practice

Whatever your specific role on a project, take the time to actually learn how to read whatever plan format your project uses, whether that is a Takt plan, a pull plan, a weekly work plan, or a day plan. Commit to raising your hand early when something needed for upcoming work is missing, rather than waiting silently until it becomes an unavoidable problem. And practice the five flow habits daily, regardless of which scheduling system sits above them on paper.

Connecting It Back to Building People, Not Just Projects

None of this happens without every person on a project genuinely understanding these systems well enough to participate in them, rather than simply following instructions without context. Building that shared understanding across an entire team is exactly what turns scheduling terminology into real, working flow on the ground.

If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams build genuine fluency in Takt planning, Last Planner, and the daily habits that create real flow.

The Challenge

So here is the challenge worth carrying onto your next shift: look ahead honestly at the work committed to for the coming days and weeks, and if you don’t have what you need, raise your hand now rather than later. As Jason put it plainly, that roadblock “should be solved by you, your lead person, your foreman, and the team, so that we never, ever, ever stop.” On we go.

FAQ

What is the difference between a Takt plan and a CPM schedule?

A Takt plan is a visual, one-page schedule showing every trade moving through zones at a consistent pace and spacing, making flow easy to see at a glance. CPM networks activities in software to calculate the longest critical path, which works well at a high, summarized level but is not well suited to detailed, day-to-day field planning.

What does “last planner” actually refer to?

It refers to the last person in the planning cycle, typically the foreman or lead person closest to the actual work being performed. The Last Planner System involves these individuals directly in confirming realistic sequencing, rather than simply receiving a schedule built without their input.

How does Scrum help field crews, even though it’s mainly an office tool?

Scrum uses a visual to-do, doing, and done board to help office staff prioritize the RFIs, submittals, and information the field actually needs to keep working. This prevents office-side delays from becoming an invisible, unaddressed bottleneck for field crews.

Why does CPM require extra caution if it’s used as a project’s master schedule?

CPM can technically show a valid critical path while still allowing multiple trades to stack into the same area at the same time, which breaks real flow even if the schedule appears mathematically sound. Anyone relying on CPM as a master schedule needs to actively verify that genuine flow between zones is still being protected.

What should a worker do if they realize they won’t have what they need for upcoming work?

Raise the issue directly and as early as possible, ideally looking a day, a week, or even several weeks ahead, rather than waiting until the moment the work is supposed to begin. Surfacing that gap early turns it into a roadblock the team can solve together well before it actually stops the work.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

Lean Onboarding Series – Flow and Pull

Posted on by Team Jason Schroeder
Read 8 min

Fast Kids, Slow Kids, and a Hike That Never Came Together

There is a story in Eli Goldratt’s business classic The Goal about a group of kids on a hike. The fast kids naturally moved to the front, hiking at their own comfortable pace, while the slower kids fell behind. The fast kids would get far ahead, stop and rest, and by the time the slower kids finally caught up, the fast kids were already rested and ready to move again. There was never a real, shared rhythm, just constant disconnection and regrouping.

The fix was simple: put the slowest kids at the front of the line, and have everyone else match that pace. Suddenly, the whole group moved together, genuinely connected, rather than constantly splitting apart and reforming.

The Real Pain: Everyone Going a Different Speed, All Over the Building

The real pain shows up directly on a failing project. One superintendent, taking over a struggling job in Tucson, described standing on the site for a few minutes just watching before doing anything else. Trades were scattered everywhere, on different floors, moving at completely different speeds, with the previous superintendent simply pointing at people and assigning tasks on the fly. It looked, in his own words, like a bunch of ants scrambling in every direction.

The Failure Pattern: Push, Not Pull or Flow

The failure pattern here has a name worth knowing directly: push. Push means work happening in different areas at different speeds with no regulated pace or distance between trades and crews. It produces exactly what that Tucson project experienced: trade stacking, out-of-sequence work, unsafe conditions, and, despite everyone staying busy, no real, measurable progress.

A few specific costs of a push system show up consistently, and they are worth naming directly:

  • Trades end up stacked on top of each other in the same physical space, with no meaningful spacing or sequence between them.
  • Work gets performed out of sequence, since there is no shared pace connecting different trades to a common rhythm.
  • Genuine progress stalls even though everyone appears busy, since scattered, ungoverned activity rarely adds up to real completion.

This Isn’t Just Semantics, It’s a Real Hierarchy Worth Understanding

Pull and flow can sound like interchangeable buzzwords, but they describe genuinely distinct approaches, and understanding the real difference matters. There is an actual hierarchy worth internalizing directly: flow is the real goal, pull is a legitimate fallback when true flow is not yet achievable, and push is never acceptable under any circumstances.

What Pull Actually Means

Pull means producing only based on actual demand, never getting ahead of what is genuinely needed next. In a sequence of connected tasks or trades, pull means moving at the pace of whoever or whatever sits directly ahead of you in that sequence, the pace-setter. If the pace-setter slows down, everyone behind them adjusts and slows down too. If the pace-setter speeds up, everyone behind speeds up to match. Materials, information, labor, and equipment all get pulled to the actual point of work exactly when needed, often signaled through a visual system like Kanban that indicates when a stock of materials or supplies genuinely needs to be replenished.

What Flow Actually Means, and How It’s Different

Flow goes a meaningful step further than pull. Rather than simply adjusting reactively to whatever pace a pace-setter happens to establish, flow means deliberately regulating both the speed and the distance between every trade or crew to a consistent, intentionally designed rhythm. In a genuinely flowing project, trades move through zones or sequence areas at a steady, consistent pace, spaced a consistent distance apart, rather than adapting moment to moment to whatever pace happens to emerge organically.

The distinction matters directly: pull adapts to whatever pace exists. Flow deliberately engineers the pace itself, along with the spacing between every trade, into something steady, sustainable, and genuinely designed rather than simply reacted to.

Why It Matters: The Turnaround Story

This matters because of exactly how that Tucson story actually ended. Rather than trying to manage the existing chaos in place, the new superintendent sent everyone home, built a genuine, coherent plan and schedule from scratch, and brought the team back into a properly regulated rhythm, consistent speed, consistent distance, real sequence. That project finished on time and finished well. The owner became a genuine, enthusiastic advocate, and that same company went on to win significantly more work from that same client afterward. That outcome was not an accident of better luck. It was the direct, measurable result of moving from push toward genuine flow.

Turning This Into Daily Practice

Aim first for real flow: regulated speed and regulated distance between every trade and crew, moving through the project in a consistent, designed rhythm. If genuine flow is not yet achievable on a given project, pull is a legitimate fallback, establishing a clear pace-setter that the rest of the team adjusts around consistently. What should never be accepted, under any circumstances, is push: scattered, ungoverned work happening at different speeds all over a project with no real sequence or spacing at all.

A few practical signs help distinguish where a project actually stands on this spectrum:

  • If trades are scattered with no consistent spacing or shared pace, and work is being directed ad hoc, that project is operating in push, the state to avoid entirely.
  • If trades maintain consistent spacing and adjust their pace based on a clear pace-setter ahead of them, that project has genuine pull.
  • If trades move at a consistent, deliberately regulated speed and consistent distance apart, without needing constant reactive adjustment, that project has achieved genuine flow.

Connecting It Back to Building People, Not Just Projects

None of this happens without leaders willing to actually design a project’s pace and sequencing deliberately, rather than assuming trades will naturally organize themselves into a workable rhythm on their own. Building genuine flow, or at minimum genuine pull, into how a project actually runs is exactly what separates projects that finish on time and build lasting client relationships from projects that scramble chaotically and lose trust along the way.

If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams build the kind of genuine flow and pull that turns scattered activity into real, measurable progress.

The Challenge

So here is the challenge worth carrying onto your next project walk: honestly assess whether your trades are moving with real, regulated flow, adjusting to a clear pull, or simply scattered in push, and take the first real step toward genuine rhythm. As Jason put it plainly, “We want flow first, and if we can’t, we at least want pull, and we never want to push.” On we go.

FAQ

What is the basic difference between flow and pull in a construction context?

Pull means adjusting your pace to match whoever or whatever is directly ahead of you in a sequence, speeding up or slowing down as needed. Flow goes further, deliberately regulating both the speed and the distance between every trade or crew into a consistent, designed rhythm, rather than simply reacting to an existing pace.

Why is “push” considered unacceptable, even though trades are technically still working?

Push means trades operate at different speeds in different areas with no regulated pace or distance between them, which leads directly to trade stacking, out-of-sequence work, and unsafe conditions. Even though everyone may appear busy, this scattered, ungoverned activity rarely produces real, measurable progress.

What does the story of the hiking kids from The Goal teach about pull systems?

Putting the fastest people at the front of a line creates constant disconnection, since slower participants fall behind and never truly move together as one group. Placing the slowest participant at the front, and having everyone else match that pace, creates a genuine, connected rhythm instead.

How does a Kanban system relate to pull in construction?

Kanban is a visual signaling system that indicates when materials, tools, or supplies at the point of work need to be replenished, ensuring resources arrive just in time rather than being stockpiled in advance. This keeps material flow tied directly to actual demand, consistent with the broader principle of pull.

Why did sending everyone home and rebuilding the schedule actually help the failing Tucson project?

The project’s problems stemmed from a complete lack of regulated pace and spacing between trades, which meant simply managing the existing chaos in place would not have solved anything. Rebuilding a genuine plan and bringing the team back into a properly regulated rhythm addressed the actual root cause, allowing the project to finish on time and rebuild the owner’s trust.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

Lean Onboarding Series – Respect for Resources

Posted on by Team Jason Schroeder
Read 8 min

“I’m Not the Plane’s Janitor”

Paul Akers once walked into an airplane restroom left in genuinely terrible condition, trash everywhere, a dirty mirror, an unsanitary mess. He was not the plane’s janitor, and nobody was paying him to clean it. He cleaned it anyway, wiping down the mirror and sink, throwing away the trash, and leaving the space better than he found it.

His reasoning was simple and worth repeating directly: that plane was a resource enabling him to do his own work, get where he needed to go, and accomplish what he set out to do. He respected that resource at a fundamental level, and that respect, not an assigned job duty, was what actually motivated him to leave it better than he found it.

The Real Pain: Wasting What Actually Enables the Work

The real pain on construction projects shows up as a familiar pattern of waste: stick-building everything on site and throwing away a full fifth of the material back out through the dumpster, submittals reviewed carelessly enough that the wrong materials get ordered and have to be replaced, materials staged carelessly and left to get damaged before they are ever even installed. Every one of these patterns represents a failure to respect the actual resources that make the work possible in the first place.

The Failure Pattern: Treating Materials, Equipment, and Spaces as Disposable

The failure pattern is a culture where materials, equipment, and shared spaces get treated as disposable, or as someone else’s responsibility entirely, rather than something genuinely appreciated and protected because it enables real work to happen. A forklift, a crane, a hoist, a set of materials staged for installation, none of these are simply expendable inputs. They are the actual resources a project depends on completely.

A few places where genuine respect for resources shows up clearly across a project team are worth naming directly:

  • Project engineers reviewing submittals carefully and inspecting deliveries, so materials do not need to be wastefully reordered or discarded.
  • Superintendents choosing prefabrication and precise pre-cutting over wasteful stick-building that generates unnecessary scrap.
  • Foremen staging and handling materials carefully enough that they are not damaged sitting around before installation.

This Isn’t About Being the Janitor, It’s About Appreciating What Enables Your Work

Paul Akers was not cleaning that restroom because it was technically his job. He did it because he genuinely appreciated that the plane, restroom included, was a resource making his own work possible. The same logic applies directly to a jobsite. Respecting a hoist, a crane, a set of materials, or a shared hallway is not about taking on someone else’s job. It is about recognizing that these things are exactly what make your own work possible in the first place.

From Submittals to Staging: Respect Shows Up at Every Level

Real respect for resources shows up differently depending on the role, but the underlying principle stays the same throughout. Project managers can write contracts so materials arrive by zone, just in time, rather than all at once creating clutter and risk of damage. Project engineers can review submittals thoroughly and inspect deliveries carefully, preventing the waste of ordering the wrong materials or discarding damaged ones. Superintendents can choose prefabrication and careful pre-cutting over wasteful stick-building that generates unnecessary scrap headed straight for the dumpster. Foremen can stage and use materials responsibly, keeping them protected rather than exposed to damage. And workers benefit directly when all of this is done well, since properly managed resources keep flow intact, protect profit, and stay out of everyone’s way rather than becoming clutter and obstacles.

Why It Matters: Waste Isn’t Just Cost, It’s Disrespect

This matters because wasted materials and damaged equipment are not simply a financial problem to track on a budget sheet. They represent a form of disrespect, toward the resource itself, and toward everyone downstream who depends on it being available, functional, and ready when needed. A culture that tolerates wasted materials or poorly maintained shared spaces is not simply being financially careless, it is failing to extend the same respect to resources that it claims to extend to people.

Teach the Framework: Appreciate It, and You Won’t Waste It

Here is a simple, repeatable mental habit worth teaching directly throughout an entire project team: genuinely name appreciation for whatever resource is actually in front of you. I appreciate this hoist. I appreciate these bathrooms. I appreciate this forklift. I appreciate this crane. That small, deliberate habit of naming real appreciation builds the underlying instinct not to waste or damage what you are actually grateful to have access to, addressing the root of waste rather than just cleaning up after it happens.

A few practical resources on a typical jobsite deserve this same deliberate respect, and they are worth naming directly:

  • Shared spaces like restrooms, lunch areas, hoists, and entryways, kept clean and functional the way you would want to find them yourself.
  • Equipment like forklifts, cranes, and lifts, used and maintained carefully rather than treated as expendable.
  • Materials staged and handled with real care, protected from unnecessary damage before they are ever installed.

Turning This Into Daily Practice

Before using any piece of equipment, entering any shared space, or handling any set of materials, pause for a moment and genuinely name what that resource actually enables you to do. Leave shared spaces better than you found them, the same way Paul Akers did on that plane, not because it is formally your job, but because you genuinely respect what that space or resource makes possible for you and for everyone else relying on it.

Connecting It Back to Building People, Not Just Projects

None of this happens without a culture that genuinely values resources as much as it values people, recognizing that wasted materials, damaged equipment, and neglected shared spaces ultimately hurt the people depending on them. Building that kind of respect into every level of a project, from procurement decisions down to how a single material gets staged, is exactly what protects flow, profit, and the people doing the work.

If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams build a genuine culture of respect for the resources that make real, flowing production possible.

The Challenge

So here is the challenge worth carrying onto your next project: pick one resource you interact with daily, a piece of equipment, a shared space, a set of materials, and genuinely name what it enables you to do before you use it. As Paul Akers put it, “This plane is a resource for me. I appreciate and respect this resource at a fundamental level.” On we go.

FAQ

Why does it matter that Paul Akers cleaned a restroom that wasn’t technically his job?

His motivation was not a sense of obligation, but genuine appreciation for the resource, the plane, that made his own work and travel possible. That same mindset, respecting what enables your work rather than treating it as someone else’s problem, applies directly to how resources get treated on a construction site.

What are some common ways construction projects fail to respect their resources?

Stick-building materials on site and discarding a significant portion as waste, carelessly reviewing submittals leading to wrong or reordered materials, and staging materials carelessly enough that they get damaged before installation are all common patterns. Each represents a failure to respect the actual resources making the work possible.

How does respecting resources connect to protecting project profit and flow?

Properly managed materials, equipment, and shared spaces stay out of everyone’s way and remain functional and available exactly when needed, which protects both schedule and profitability. Wasted or damaged resources create clutter, delays, and unnecessary costs that ripple through the entire project.

What is a simple habit for building genuine respect for resources on a jobsite?

Deliberately naming appreciation for a specific resource, a hoist, a crane, a set of materials, before using it helps build the underlying instinct not to waste or damage it. This small, repeatable practice addresses the root cause of waste rather than just cleaning up after it occurs.

Does respecting resources apply only to materials and equipment, or also to shared spaces?

It applies to both. Restrooms, lunch areas, hallways, and entryways deserve the same genuine care and respect as materials and equipment, since they are all resources that enable people to do their work effectively and comfortably.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

Lean Onboarding Series – Mentoring & Training by Foremen

Posted on by Team Jason Schroeder
Read 8 min

Not a Police Officer, a Mentor

A foreman’s job is not to police behavior. It is not to yell, throw hard hats, or run a compliance operation modeled on catching people doing something wrong. The actual core of the role, the part that determines whether a crew genuinely improves over time, is mentoring and training people, consistently, every single day.

The Real Pain: A Quiet, Absent, or Firefighting Foreman Isn’t Doing the Job

The real pain shows up in a few familiar patterns. A foreman constantly running back and forth to the hardware store. A foreman disconnected and sitting in a truck rather than genuinely present with the crew. A foreman working silently alongside the crew, so buried in the physical task that no real coaching or direction ever happens. None of these patterns reflect a foreman doing the actual job, regardless of how busy or hardworking any of them might look from a distance.

The Failure Pattern: “That’s In My Way, We Have to Stop”

The failure pattern shows up clearly in a specific phrase worth listening for directly: that’s in my way, we have to stop. A foreman who constantly announces roadblocks and demobilizes the crew, rather than identifying and removing those roadblocks days ahead of time, is operating in pure reaction mode. That posture is a lagging indicator of a foreman not actually doing their job, not a sign of an unusually difficult project.

A few signs tend to show up when a foreman is functioning more like an absentee enforcer than a genuine mentor, and they are worth checking honestly:

  • The foreman is frequently away from the crew, running errands or disconnected in a vehicle rather than genuinely present.
  • The foreman works so deeply inside the physical task alongside the crew that no real coaching or direction happens throughout the day.
  • Roadblocks get announced reactively, in the moment, rather than identified and resolved days ahead of time.

This Isn’t About Being Soft, It’s About What Actually Builds Capability

Choosing mentorship over pure enforcement is not a soft leadership style layered on top of the real work. It is the actual mechanism by which a crew’s skill and independence genuinely grow over time. A foreman who only enforces compliance never builds a crew capable of thinking through problems on their own, which means every gap in that foreman’s presence becomes a gap in the crew’s actual capability.

“This Is How You…”

Here is what real, daily mentorship actually sounds like in practice: this is how you install this pipe, this is how you hang this sheet of drywall, this is how we mobilize this material, let me stay with you and show you how to operate this piece of equipment properly. These are not one-time onboarding lessons delivered once and never repeated. They are real, individualized coaching moments happening throughout an ordinary workday, aimed at specific people doing specific tasks in that exact moment.

Why It Matters: The Measure of Success Is How People Feel, Not Just What Gets Built

This matters because of a genuinely useful, values-forward measure of success worth adopting directly: do workers and lead persons feel like they are being trained every single day. That standard shifts the definition of a successful foreman away from pure output alone and toward whether people on that crew are actually growing, being invested in, and developing real skill over time. A project can hit its numbers in the short term under a purely enforcement-driven foreman. It rarely builds a genuinely stronger, more capable crew that way.

Teach the Framework: The Daily Rhythm of a Mentoring Foreman

The actual daily rhythm worth building looks like this. After the crew preparation huddle, once everyone already has their pre-task plans, their materials pre-staged, and a clear individual list of what they are accomplishing that day, the foreman does not disappear into paperwork or a separate task. Instead, the foreman deliberately moves through the crew, checking that everyone is working properly in their respective area, and intentionally spending real time with each individual specifically to coach, mentor, and train, not simply to inspect and correct.

This requires the foreman to already be looking well ahead of the current work, five or six units, several rooms, a couple of zones out, actively confirming that previous trades are done, inspections are complete, materials are staged, and everything the crew will need next is already prepared. That forward-looking posture is precisely what frees up real time during the day for genuine mentorship, rather than constant reactive firefighting.

A few practical daily habits make this kind of mentorship real rather than aspirational, and they are worth naming directly:

  • Build dedicated time into each day specifically for one-on-one coaching moments with individual crew members, rather than treating mentorship as something to fit in if time allows.
  • Track whether workers and lead persons genuinely report feeling trained and invested in, not just whether output targets were met.
  • Watch directly for the phrase “that’s in my way,” and treat it as a signal to shift toward proactive, ahead-of-the-work preparation rather than reactive problem announcement.

Turning This Into Daily Practice

Build real, protected time into each day specifically for individual coaching moments, rather than assuming mentorship will simply happen naturally in the gaps between other tasks. Ask crew members directly, and regularly, whether they feel like they are actually being trained and developed, not just supervised and corrected. And treat any recurring pattern of last-minute roadblocks as a signal that preparation needs to move further ahead of the actual work, not as an unavoidable cost of doing business.

Connecting It Back to Building People, Not Just Projects

None of this happens without foremen willing to see mentoring and training as their actual primary job, not a secondary task squeezed in around supervision and firefighting. Building that identity directly into how a foreman spends their day is exactly what turns a crew into people who are genuinely growing, not just people who are getting through each day’s task list.

If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams build the kind of daily mentorship that develops real capability, not just short-term compliance.

The Challenge

So here is the challenge worth carrying onto your next shift: ask your crew directly whether they feel like they are being trained today, and if the honest answer is no, make tomorrow different. As Jason put it plainly, “Foremen are the chief mentors. Foremen are the chief trainers. Foremen are the chief enablers.” On we go.

FAQ

Why shouldn’t a foreman act like a compliance officer or enforcer?

Pure enforcement, catching mistakes and correcting behavior after the fact, does not build a crew’s genuine skill or independence over time. Real mentorship, teaching and coaching people directly through their actual tasks, is what develops a crew capable of thinking through problems on their own.

What does real, daily mentorship from a foreman actually look like?

It looks like specific, individualized coaching moments throughout the day, showing someone exactly how to install a pipe, hang drywall, or operate a piece of equipment, rather than a one-time training session delivered once and never repeated. This happens consistently, built into the actual daily rhythm of the work.

Why is “that’s in my way, we have to stop” considered a sign of foreman failure?

A foreman who constantly announces roadblocks reactively, rather than identifying and removing them days ahead of time, is operating in pure reaction mode rather than genuine leadership. A well-prepared foreman looks several units or zones ahead of the current work, resolving obstacles before the crew ever encounters them.

What is a meaningful way to measure whether a foreman is doing their job well?

Beyond output and schedule performance, a genuinely useful measure is whether workers and lead persons feel like they are being trained and developed every day. This standard reflects whether real mentorship is actually happening, not just whether tasks are getting completed.

How does looking ahead of the work connect to a foreman’s ability to mentor effectively?

When a foreman is already confirming that materials, inspections, and prior trade work are complete several zones or rooms ahead, it frees up real time during the current work to focus on coaching and mentoring individual crew members. A foreman stuck reacting to immediate problems has far less genuine capacity left for real, individualized training.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

Lean Onboarding Series – Respect for Safety

Posted on by Team Jason Schroeder
Read 8 min

“I Approve This Message”

Whatever happens on a project site, including every safety violation that keeps happening, is something leadership specifically tolerated. If a worker is not wearing safety glasses, if fall protection is being ignored, if a ladder is being used incorrectly, that is not simply bad luck or an unavoidable reality of construction. It is something a project executive, superintendent, project manager, or foreman effectively signed off on by choosing not to stop it.

That framing sounds harsh at first. It is also accurate. If leadership genuinely wanted a perfectly safe site, and was willing to hold the line consistently, it would happen. The culture of any organization is shaped directly by the worst behavior its leaders are willing to tolerate.

The Real Pain: Confusing Silence With Kindness

The real pain is the instinct to let a minor unsafe behavior slide because correcting it feels awkward, confrontational, or simply inconvenient in the moment. That instinct feels like kindness. It is actually the opposite. If seeing someone being unsafe, knowing that a simple reminder might not actually change their behavior, and choosing not to intervene anyway, that is not genuine care. Genuine care means actually fixing the situation, even when it is uncomfortable, because the alternative risks that person not making it home safely to their family.

The Failure Pattern: Not Enforcing Rules Sends Its Own Message

The failure pattern is failing to enforce safety standards consistently, which communicates something specific and genuinely disrespectful, whether intended or not: an implicit belief that people are not smart enough, capable enough, or trustworthy enough to follow the same rules everyone else on site follows. Real zero tolerance is not about doubting people’s capability. It is built on the opposite belief, that workers, foremen, and everyone on a project site are fully capable of meeting a clear, consistently enforced standard, because they are.

A real zero-tolerance list belongs in a specific, defined set of categories, and they are worth naming directly:

  • Any violation of orientation training or basic OSHA standards that workers have already received and understood.
  • Behavior clearly indicative of a bad attitude, inattention, or a genuine lack of proper training for the task at hand.
  • High-risk activities specifically, including ladder use, electrical work, fall protection, confined space entry, and excavation.

This Isn’t About Catching People, It’s About Distinguishing Honest Mistakes From Preventable Ones

None of this is a “gotcha” system built to catch people out. A genuine zero-tolerance approach draws a clear, important distinction between honest mistakes, things that genuine attention, a good attitude, or proper training could not have prevented, and truly preventable violations, things directly tied to attitude, attention, or a real training gap. Honest mistakes get a simple reminder and a real second chance. Preventable violations, tied to attitude or attention, get treated seriously and consistently. That distinction is exactly what keeps the whole system rooted in fairness and respect rather than sliding into pure punishment.

Why Safety Glasses Come First

Here is a deliberate, specific starting point worth understanding directly. Enforcing safety glasses consistently, above almost anything else, has a real psychological effect on an entire site’s culture. Someone unwilling to maintain that most basic, simple standard is genuinely less likely to properly maintain more complex, critical standards like fall protection later. Safety glasses function as an early behavioral trigger, setting the tone for how seriously every other standard on site will actually be taken.

Why It Matters: The Real Numbers Behind a Respectful Zero-Tolerance System

This matters because of real, concrete results worth sharing directly. Running a multi-hundred-million-dollar project over twenty-four to thirty months under this exact system required sending only about twenty people home total, and only around four of those were permanent removals. That is a remarkably low number for a project of that scale, and it demonstrates something important: a consistently and respectfully enforced standard does not require constant, heavy-handed punishment. People genuinely rise to meet a clear, fairly applied standard, because they are fully capable of it.

Teach the Framework: The Actual Protocol, Step by Step

The real protocol starts with framing every correction around genuine care, not punishment: because we care about your safety, we need to give you time to focus, retrain, or plan the work properly, so let’s have you go home for the day and come back tomorrow through orientation. Unless the violation is major, this means a temporary, respectful pause, not a permanent consequence. The person’s own foreman gets brought in directly, with a clear explanation of what happened and why. A formal communication goes to that person’s employer, explaining the reasoning and specifically requesting retraining, proper tools, or a direct conversation to reset expectations.

Every incident gets logged, not to build a punitive record, but to track genuine patterns and make sure repeat issues are actually being caught and addressed. If a minor violation happens a second time, that person does not return to the project. If a violation is serious enough that it could have genuinely killed the person themselves or someone else, they do not return at all, even on a first occurrence, and need to find work elsewhere.

A few practical starting points help build this kind of genuine, respect-based zero-tolerance culture from the ground up:

  • Explain the full policy clearly during orientation, before anyone begins work, so expectations are never a surprise.
  • Reinforce the standard daily through safety huddles, consistently and without exception.
  • Hold the line firmly, especially during the first several weeks, since consistency early on is exactly what makes the standard self-sustaining later.

Turning This Into Daily Practice

Build the habit of explaining every safety correction through the lens of genuine care, not punishment, both to the individual involved and to their employer. Reinforce standards daily rather than occasionally, and stay consistent even when it feels uncomfortable to hold the line, particularly in the early weeks of a project when the culture is still being established. Remember that the actual goal, every single time, is making sure someone gets home safely to their family, never punishment for its own sake.

Connecting It Back to Building People, Not Just Projects

None of this happens without leaders willing to hold a consistent, respectful standard even when it feels easier in the moment to let something small slide. Building that discipline directly into daily leadership is exactly what creates a genuinely safe project, not through fear or heavy-handed enforcement, but through consistent, respectful expectations that people are fully capable of meeting.

If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams build the kind of respectful, consistent safety culture that protects people without relying on constant punishment.

The Challenge

So here is the challenge worth carrying onto your next project: the next time you see something unsafe and feel the urge to let it slide, remember that staying silent is not actually the kind option, and correct it out of genuine care instead. As Jason put it plainly, “If something is happening on your project site that’s unsafe, it’s because you allowed it.” On we go.

FAQ

Why does enforcing safety rules consistently count as an act of respect rather than punishment?

Failing to hold people to a clear safety standard implicitly suggests they are not capable of meeting it, which is a disrespectful assumption. Consistent enforcement, framed around genuine care, communicates the opposite: a real belief that people are fully capable of following the standard because they are smart and capable.

What is the difference between an honest mistake and a preventable safety violation?

An honest mistake is something that genuine attention, a good attitude, or proper training could not have prevented, and it deserves a simple reminder and a real second chance. A preventable violation is directly tied to attitude, inattention, or a genuine training gap, and it needs to be addressed seriously and consistently.

Why does enforcing safety glasses matter so much as a starting point?

Consistently enforcing a basic, simple standard like safety glasses has a real psychological effect on how seriously an entire site takes every other safety standard. Someone unwilling to maintain that basic requirement is often less likely to properly maintain more complex protections like fall protection later.

What actually happens when someone violates a zero-tolerance safety standard under this system?

Unless the violation is major, the person is sent home for the day, framed around genuine care for their safety, and can return the next day through orientation after their employer is notified and asked to provide retraining. A second minor violation, or any single serious violation that could have caused a fatality, results in that person not returning to the project at all.

Does a strict zero-tolerance safety system actually require constant punishment to work?

Real-world results suggest otherwise. On one large, multi-hundred-million-dollar project run over more than two years under this exact system, only around twenty people total needed to be sent home, with just a handful of permanent removals, showing that consistent, respectful enforcement leads most people to genuinely meet the standard.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

Lean Onboarding Series – Respect for Cleanliness & Organization

Posted on by Team Jason Schroeder
Read 8 min

The Cleanest Sites Are the Best-Run Sites

Cleanliness, organization, and the right-sized management of material inventory are among the clearest indicators of a construction project’s real health and stability. This is not a cosmetic detail layered on top of the real work. It is one of the most reliable early signals of whether a project is genuinely under control or quietly heading for trouble.

The Real Pain: Composite Cleanup Crews Mask the Real Problem

The real pain shows up in a common but misguided practice: hiring separate laborers whose entire job is cleaning up after other trades. That approach does not fix disorganization, it hides it. Electricians end up cleaning up drywall debris, drywallers end up cleaning up electrical conduit, and the actual behavior causing the mess in the first place never gets addressed. A genuine commitment to never using composite cleanup crews, and instead expecting every crew to clean up their own work, removes that mask entirely and forces the real issue into view.

The Failure Pattern: A Little Mess That Snowballs Into a Big One

The failure pattern is accepting “good enough” as the cleanliness standard rather than holding the line at genuinely clean. A small tolerance for mess compounds quickly, because habits, once established, become extremely difficult to correct later. Perfect has to be the actual standard, not because perfection itself is the point, but because anything less quickly erodes into acceptance of clutter, safety hazards, and disorganization as simply normal.

A few things a clean, organized site reveals directly about the project underneath it, and they are worth checking honestly:

  • Crew disorganization and dysfunctional leadership routines show up almost immediately in how messy or organized a crew’s area actually is.
  • Whether a general contractor genuinely has operational control of a project can be read directly from how clean the site stays without constant reminders.
  • Morale, cost performance, quality, safety, and schedule all tend to track closely with how clean and organized a site actually is.

This Isn’t About Punishment, It’s About Respect

None of this is about punishing crews for a messy area. Enforcing real cleanliness is rooted directly in respect: an unclean site costs other trades real money, real safety, and real hours, since people trip over clutter, lose time searching for tools and materials, and work in genuinely more dangerous conditions than necessary. Framing cleanliness this way, as protecting everyone’s ability to work safely and efficiently rather than as a punitive standard, is what actually earns genuine buy-in from crews and trade partners.

Leadership Has to Pick Up the Trash Themselves

Here is a practical, humbling standard worth adopting directly. Senior superintendents and project managers need to be seen personally picking up trash during site walks, not simply pointing it out for someone else to handle. If the mess is too significant to handle in the moment, stopping and getting it corrected on the spot matters more than walking past it. Taking photos during these walks and sending them directly to the relevant foreman or trade partner for immediate correction reinforces the standard concretely, and mentioning it again the next morning in the worker huddle keeps it visible and consistent.

Why It Matters: A Six-Week Investment That Pays for Itself

This matters because of a real, practical timeline worth understanding directly. Genuine enforcement, including a real willingness to shut down a crew if their cleanliness genuinely is not meeting the standard, for roughly the first six weeks is typically what it takes to make cleanliness a self-sustaining project habit. After that point, the standard largely maintains itself with far less active oversight, and new waves of trade partners arriving later simply need to be trained into the existing culture rather than requiring the whole standard to be rebuilt from scratch.

Teach the Framework: The Practical Steps to a Perfectly Clean Site

The practical system starts with a clear, upfront decision: no composite cleanup crews, and no paid laborers hired specifically to clean up someone else’s mess. From there, genuine team buy-in matters enormously, achieved by explaining clearly why this standard exists, protecting people and other trades from real cost and safety risk, rather than presenting it as an arbitrary rule. The standard itself needs to be held at genuinely perfect, not merely acceptable, since anything less invites gradual erosion. This gets reinforced daily through worker huddles and safety huddles, consistently and without exception, until the habit becomes durable enough to sustain itself.

A few practical ways to enforce this standard without it feeling like punishment are worth naming directly:

  • Explain clearly and repeatedly why the standard exists, focusing on protecting other trades and worker safety, not on assigning blame.
  • Have leadership visibly participate in cleanup themselves during every site walk, rather than only directing others to do it.
  • Retrain each new wave of incoming trade partners into the existing cleanliness culture as they arrive, rather than assuming they will absorb it automatically.

Turning This Into Daily Practice

Audit honestly whether your own project currently relies on a composite cleanup crew, and consider what it would take to phase that practice out entirely in favor of crews genuinely cleaning up their own work. Build the habit of leadership physically participating in cleanup during every site walk, and communicate consistently, in orientation, in daily huddles, and in ongoing reminders, that this standard exists to protect people, not to punish anyone.

Connecting It Back to Building People, Not Just Projects

None of this happens without leaders willing to hold a genuinely high standard consistently, especially in those first several weeks when the habit has not yet taken hold on its own. Building that discipline directly into daily leadership is exactly what turns cleanliness from an occasional reminder into a durable, self-sustaining part of a project’s actual culture.

If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams build the kind of clean, organized standards that reflect genuine operational control and real respect for the people doing the work.

The Challenge

So here is the challenge worth carrying onto your next project: commit to holding a genuinely perfect cleanliness standard for the next six weeks, with leadership visibly modeling it themselves, and watch how much else on the project starts to improve alongside it. As Jason put it plainly, “A clean site is a stable site, and stable sites and systems are the only environments where improvements in human respect can flourish.” On we go.

FAQ

Why are composite cleanup crews considered a problem rather than a helpful solution?

Hiring separate laborers to clean up after other trades masks the real issue rather than solving it, since the crews actually causing the disorganization never have to address their own habits. Requiring each crew to clean up their own work forces genuine accountability and prevents the underlying dysfunction from staying hidden.

Why does the cleanliness standard need to be “perfect” rather than just “good enough”?

A small tolerance for mess tends to compound quickly, since habits, once established, become genuinely difficult to correct later. Holding the line at a perfect standard prevents that gradual erosion from ever taking hold in the first place.

How long does it typically take to establish cleanliness as a self-sustaining habit on a project?

Consistent, genuine enforcement for roughly the first six weeks is usually what it takes for cleanliness to become a durable project habit that requires far less active oversight afterward. New trade partners arriving later can then simply be trained into the existing standard rather than requiring the whole culture to be rebuilt.

Why does leadership need to personally pick up trash rather than just pointing it out?

Visibly modeling the standard themselves gives leadership real credibility when asking others to meet it, rather than appearing to hold others to a standard they are not willing to practice themselves. This visible participation is often what actually earns genuine buy-in from crews and trade partners.

How can a project enforce cleanliness standards without it feeling punitive?

Framing the standard clearly around protecting other trades’ safety, time, and money, rather than assigning blame, helps crews understand the real reasoning behind it. Consistent reinforcement through daily huddles, combined with leadership modeling the behavior themselves, reinforces that the standard is about mutual respect, not punishment.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

What Is a Field Leadership Program? Leaders as a Support System

Posted on by Team Jason Schroeder
Read 8 min

Here’s the deal. I was recently invited to speak at a field leadership program graduation for Robins and Morton, a company I have genuine admiration for, run by people like Jen Lacy and Steve Moore who treat their craft workers remarkably well. I do not fly around much anymore, since my schedule is full and I love being present with my own kids. For this, despite a grueling multi-hop itinerary getting there and back, I said yes without hesitation. By the end of the talk, I was genuinely emotional, and I want to explain why this program matters so much to me.

Short answer: A field leadership program is a multi-month path that develops craft workers and foremen into leaders, with mentoring, shoulder-to-shoulder work, and a real promotion at the end.

Where My Own Belief in This Comes From

I did not come up through college. From about thirteen and a half years old until I was nineteen, I worked every break I had at a company called Conco Construction, technically working before I was legally old enough to, as a form setter, equipment operator, and cement mason finisher. I genuinely grew up inside this industry.

My own path forward opened up because of my dad, who worked at Service Rock Products and helped me get a union apprenticeship at Hensel Phelps, working as a cement mason on a federal prison project in Victorville, California. I was working hard, maybe a little chaotic, and I strained my shoulder on the job, likely something that runs in my family more broadly rather than a pure workplace injury. Instead of simply setting me aside, the leaders on that project kept me working, moving me into a role as a rodman supporting the field engineers. I fell in love with that work immediately and never wanted to go back.

From there, I worked my way up to a full field engineer, then lead field engineer, reading Wesley G. Crawford’s book Construction Surveying and Layout along the way. I even bought my own computer on credit and taught myself AutoCAD, using a copy I should not have used, something I genuinely do not recommend to anyone else, but it reflects how committed I was to learning everything I possibly could. From there, the promotions kept coming. Field engineer, lead field engineer, VDC, assistant superintendent, superintendent, project superintendent, senior superintendent, general superintendent, field director, project director, and eventually owning my own businesses, now employing over a hundred people across consulting, training, project support, and manufacturing, plus our own construction company.

Do We Have a Labor Shortage or a Training Shortage?

Every time someone gets a genuine chance like the one I was given, this industry gets better. I do not believe we have a labor shortage. I believe we have a training shortage and a hiring problem. There are plenty of capable people out there. What they need is real development, not another posting nobody with real potential ever sees.

I think about the version of me who strained a shoulder on a jobsite at nineteen years old, with no college degree and no obvious next step. If the leaders on that project had simply let me go rather than finding a way to keep me working and growing, none of what came after would exist. The businesses, the books, the training programs, the people we now employ. All of it traces back to a handful of leaders choosing development over convenience at exactly the right moment.

Our workers and foremen are genuinely smart and capable. What they actually need is somebody willing to work shoulder to shoulder with them and open a real door. That path can start through college, through another industry entirely, or directly as a craft worker, the way mine did.

Watch for these signs your own organization is treating this as a hiring problem rather than a development problem:

  • Genuinely capable people passed over because they lack a specific credential rather than because they lack real potential.
  • No structured, multi-month development path for craft workers who show genuine leadership capability.
  • Promotion decisions made without real mentorship or shoulder-to-shoulder investment behind them.

What Robins and Morton Is Actually Doing

Robins and Morton puts real money behind this belief. Their program uses our books, Elevating Construction Superintendents and Elevating Construction Foremen, as part of a real multi-month development path. They take some of the best people already in the industry, invest in genuine mentoring and shoulder-to-shoulder development throughout, and at the end of that process, actually promote them into senior-level positions. That last part matters enormously. A development program that never actually leads to real advancement is not a genuine investment. It is a gesture.

Plenty of companies run training sessions or hand out a manual and call it development. Very few commit to months of structured mentorship followed by an actual promotion at the end. That follow-through is exactly what separates a program that genuinely changes careers from one that simply looks good on a company’s website.

What Does It Mean to Elevate as a Support System?

Here is the concept I shared at that graduation that I could barely get through without becoming emotional. We have not elevated above the craft. We have elevated as a support system.

That distinction changes everything about how leadership should actually think about its own role. It is our job to make sure workers and foremen have full kit, because they are our first customer. The building owner is our second customer. Once you accept that order, everything about leadership positions changes meaning. Moving into a support and enablement role does not mean rising above the people doing the physical work. It means taking on the responsibility of serving them well enough that they can earn any salary they want, support their families, and preserve their bodies over a long career, all while genuinely supporting the craft that actually builds the project.

Why This Deserves to Spread Across the Industry

If you ever get the chance to visit a Robins and Morton jobsite, or observe their field leadership program directly, take it. What I witnessed there reflects exactly what this industry needs far more of. We do not have a labor shortage. We have a training shortage, and companies like Robins and Morton are genuinely leading the way in closing that gap.

So here is the challenge. Look at your own organization’s craft workers and foremen and ask honestly whether any of them show genuine leadership potential that has never been given a real development path. If you find even one, that is exactly where to start building the kind of program that changed the entire course of my own career. Build your leadership development around that principle, and watch what happens to the people who finally get a real chance.

Bottom line: We have not elevated above the craft; we have elevated as a support system.

If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams stabilize, schedule, and flow.

On we go.

FAQ

What is a field leadership program?

It is a structured, multi-month development path that takes capable craft workers and foremen, mentors them shoulder to shoulder, and promotes them into senior-level positions at the end. Without the promotion, it is a gesture, not an investment.

Why does Jason say construction has a training shortage, not a labor shortage?

There are plenty of capable people who want to work in this industry. What is missing is real mentorship, training programs, and advancement paths for the people already showing up and doing the work.

What makes the Robins and Morton field leadership program stand out?

It pairs structured curriculum with months of mentorship, and it ends with a real promotion into a senior-level position. A program that never leads to advancement is a gesture, not an investment.

What does it mean for leadership to be a support system for the craft?

It means my job is to make sure workers and foremen have full kit: materials, information, and support. They are our first customer, and the building owner is our second.

Can you advance into construction leadership without a college degree?

Yes. I started as a form setter and cement mason, moved into field engineering, and worked my way up to running my own businesses without a college degree. What matters is capability paired with real development, mentorship, and a company willing to invest in your growth.

People Also Read:
Human Connection
Its about People!
The Ladder of Accountability

If you want to learn more we have:

-Takt Virtual Training: (Takt Virtual Training)
-Check out our YouTube channel for more info: (Elevate Construction on YouTube)
-Listen to the Elevate Construction podcast: (Elevate Construction Podcast)
-Check out our training programs and certifications: (Training Programs and Certifications)
-The Takt Book: (The Takt Book on Amazon)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction. As the company’s Founder and COO, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

I’ll Say It Again… Supers that don’t Schedule is just NOT a THING!

Posted on by Team Jason Schroeder
Read 6 min

Why There Is No Such Thing As A Superintendent Without A Schedule

A superintendent stood on site, phone to his ear, looking every bit the part in front of the whole crew. He had no idea a critical owner deadline was five weeks away. That gap between looking like a superintendent and actually being one is the whole story worth understanding here.

Where Presence Gets Mistaken For The Actual Job

Someone in the superintendent role has genuine presence, real rapport with the crew, and a clean, organized site, all things genuinely worth having and building over time. None of that actually adds up to the real job without one specific thing sitting underneath it the entire time. A superintendent who cannot answer a basic question about an upcoming deadline, because the master schedule was never actually being followed or updated, is missing the one piece that everything else genuinely depends on.

Confusing The Look Of The Role With Its Substance

The failure pattern is assuming that presence, activity, and good relationships are the actual substance of the superintendent role, rather than recognizing them as valuable things that still cannot substitute for the one genuinely non negotiable requirement. Looking busy, staying visible, and having a good rapport with the foremen are real strengths. They do not replace actually knowing, using, and living inside a real schedule every single day.

The System Failed Them, They Didn’t Fail The System

The system failed them, they did not fail the system. If companies promote people into the superintendent role without making this specific requirement genuinely clear from the start, that reflects a real gap in how the industry prepares people for the position, not a personal failing of someone placed there without adequate support. Without that clarity, it becomes easy to believe that presence and rapport alone are sufficient for a role that actually depends on something else entirely.

A Deadline Nobody Saw Coming

One real story shows exactly what this gap looks like in practice. Walking a project, a simple question was asked about when a specific section of the building needed to be finished. The answer revealed a real problem, no clear idea of what needed to happen in the coming weeks, and no awareness at all of a critical owner deadline sitting just five weeks away. The master schedule existed somewhere. It was not actually being followed, updated, or used to guide real decisions on the ground.

Why This Distinction Matters

This matters because a real schedule is what actually allows anyone to plan ahead with confidence. Without a specific activity locked into a real date, there is no way to verify that materials, manpower, tools, equipment, and layout will actually be ready when the work needs to happen. A clean site and good rapport cannot substitute for that kind of forward visibility, no matter how genuinely valuable they are on their own.

Seeing The Future Is Part Of The Actual Job

One useful way to think about the distinction between roles involves a simple comparison. It is a project manager’s job to understand what an owner genuinely wants and needs. It is a superintendent’s job to actually see the future of the project itself, anticipating what needs to happen weeks and months ahead. Nobody can genuinely see that far ahead without something to actually look into, and a real, current schedule functions exactly like that, a working tool for seeing what is coming before it actually arrives.

What Genuinely Being In The Schedule Actually Requires

Keep these in mind, since each one reflects real ownership, not just presence.

  • Knowing specific upcoming deadlines without having to guess
  • Actively updating the schedule instead of letting it go stale
  • Using the schedule to verify materials, manpower, and equipment
  • Treating the schedule as a working tool, not a forgotten document

Connect To Mission

None of this means presence and rapport do not matter on a real project. If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams stabilize, schedule, and flow. It means recognizing that genuine ownership of the schedule is the one requirement nothing else can actually replace.

Signs Someone Is Playing The Role Without Doing The Job

Watch for these signs before assuming presence alone means the job is genuinely being done.

  • Unable to answer a specific question about an upcoming deadline
  • A master schedule that exists but is not actually being followed
  • Real activity and visibility without any real forward planning
  • Surprise at a deadline that should have been clearly visible in advance

A Challenge For Every Leader In The Superintendent Role

Here is the challenge this week. Open your own schedule today, and honestly check whether it reflects what is actually happening on your project right now. As has been said plainly, it is the superintendent’s job to see the future, and a real, current schedule is the only way to actually do that.

On we go.

Frequently Asked Questions

Why isn’t presence and good rapport enough to make someone a real superintendent? Presence and rapport are genuinely valuable, but they do not provide the forward visibility that a real schedule offers, which means a project can still drift toward a missed deadline even when everything else looks like it is going well.

What does it actually mean to be genuinely in the schedule? It means actively knowing, updating, and using a real schedule every day to verify upcoming deadlines and confirm that materials, manpower, and equipment will actually be ready when needed.

What is the difference between a project manager’s role and a superintendent’s role? A project manager focuses on understanding what an owner genuinely wants and needs, while a superintendent focuses on seeing the actual future of the project itself, anticipating what needs to happen well before it arrives.

Why can’t you plan for materials, manpower, or equipment without a real schedule? Without a specific activity locked into an actual date, there is no way to verify in advance that the right resources will actually be available when the work needs to happen, which leaves a project reacting instead of planning ahead.

What should happen if someone in the superintendent role isn’t willing to learn scheduling? Since genuine schedule ownership is the one non negotiable requirement of the role, someone unwilling to learn it is not yet ready for the position, regardless of how strong their other skills or relationships happen to be.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All

Its Time for Workers & Foremen to Step up Too!

Posted on by Team Jason Schroeder
Read 6 min

Why Respect On A Jobsite Has To Go Both Directions

Companies are investing real money and real effort in better training, better schedules, and better working conditions for their crews. That investment deserves to be met with genuine professionalism in return, not simply assumed or taken for granted by anyone involved.

Where Investment Gets Met With Indifference

A company builds dedicated training programs, tracks real metrics, and puts genuine resources behind creating a better working environment for its people over months and years. That investment sometimes gets met with indifference, lateness, or a lack of real engagement from the very people it was built to serve in the first place. Neither side actually benefits when respect only flows in one direction instead of both.

Treating Respect As A One Way Obligation

The failure pattern is assuming that respect and professionalism only need to flow in a single direction, either workers should simply be grateful for whatever a company provides, or a company should simply provide without expecting real professionalism in return. Genuine respect on a jobsite is a two way commitment. It requires real investment from leadership and real professionalism from everyone receiving that investment.

The System Failed Them, They Didn’t Fail The System

The system failed them, they did not fail the system. Nobody explicitly frames workplace respect as something built jointly by both sides, so it becomes easy to assume it is owed automatically rather than something maintained through consistent, professional conduct from everyone involved. Without that framing, real investment in a workforce can quietly go unappreciated, and real professionalism can quietly go unrewarded.

What Genuine Investment In A Workforce Actually Looks Like

Several real companies show what this genuine investment actually looks like in practice. Dedicated trainers and team development staff who track real metrics and measurable results. Daily huddles with every single person on a job, not just leadership. Structured onboarding, real boot camps, and genuine quality checklists built into daily operations. Financial incentives tied directly to real performance, safety numbers, and saved labor hours, designed specifically to put real money back into the hands of the people doing the work. These are not small gestures. They represent genuine, ongoing investment in the people actually building the project.

Why This Distinction Matters

This matters because that kind of investment only produces its full value when it gets met with real professionalism in return. A company can build the best training program in the industry, and it will still underperform if the people receiving that training do not take it seriously, show up consistently, and treat safety and quality as the genuinely serious matters they actually are. Mutual respect is not a nice extra layered on top of good systems. It is what actually makes those systems work as intended.

What Professional Conduct In Return Actually Requires

Professional conduct is not a complicated standard to meet. It looks like showing up on time and ready to work. It looks like taking safety seriously instead of treating it as an inconvenience or a joke. It looks like honest, ethical conduct with company materials and genuine respect for the people trying to help a team succeed. It looks like treating a real training opportunity, a boot camp, a huddle, a coaching session, as something worth genuine attention rather than something to sit through passively.

Signs Of Real Investment Worth Recognizing

Keep these in mind when evaluating whether a company is genuinely investing in its people.

  • Dedicated training staff who track real, measurable results
  • Daily huddles that include every single person on the job
  • Financial incentives tied directly to real, tracked performance
  • Structured onboarding, boot camps, and genuine quality checklists

Connect To Mission

None of this means professionalism only matters for workers and foremen. If your project needs superintendent coaching, project support, or leadership development, Elevate Construction can help your field teams stabilize, schedule, and flow. It means recognizing that genuine respect on a jobsite runs in both directions, built jointly by real investment from leadership and real professionalism from everyone receiving it.

Signs Of Genuine Professionalism Worth Expecting

Keep these in mind as the baseline for genuine professionalism on any project.

  • Showing up on time and ready to engage with the work
  • Taking safety and quality seriously, not as a joke or afterthought
  • Treating real training and coaching opportunities with genuine respect
  • Acting with honesty and integrity toward company resources and people

A Challenge For Every Leader And Every Crew Member

Here is the challenge this week. Whether you are investing in a team or receiving that investment, take one honest look at whether real respect is actually flowing in both directions on your project. Genuine respect is built jointly, and it is worth protecting on both sides of that relationship.

On we go.

Frequently Asked Questions

Why does workplace respect need to go in both directions? Genuine respect on a jobsite depends on real investment from leadership and real professionalism from the people receiving it, and when either side stops holding up its part, the whole relationship quietly breaks down.

What does genuine investment in a workforce actually look like? It looks like dedicated training staff, daily huddles that include everyone, financial incentives tied to real performance, and structured onboarding and quality systems built into daily operations, not just occasional gestures.

What does professional conduct look like in return? It looks like showing up on time, taking safety and quality seriously, treating training opportunities with genuine attention, and acting with honesty and integrity toward the people and resources involved.

Why do real training and better systems only work if people take them seriously? Even the best training program or incentive structure underperforms if the people receiving it do not engage seriously, since real systems depend on genuine participation to actually produce their intended results.

How can a company build a culture of genuine mutual respect? Consistently investing real resources in training and better systems, while also holding a clear, fair standard for professional conduct in return, builds the kind of mutual respect that actually strengthens a team over time.

If you want to learn more we have:

-Takt Virtual Training: (Click here)
-Check out our Youtube channel for more info: (Click here) 
-Listen to the Elevate Construction podcast: (Click here) 
-Check out our training programs and certifications: (Click here)
-The Takt Book: (Click here)

Discover Jason’s Expertise:

Meet Jason Schroeder, the driving force behind Elevate Construction IST. As the company’s owner and principal consultant, he’s dedicated to taking construction to new heights. With a wealth of industry experience, he’s crafted the Field Engineer Boot Camp and Superintendent Boot Camp – intensive training programs engineered to cultivate top-tier leaders capable of steering their teams towards success. Jason’s vision? To expand his training initiatives across the nation, empowering construction firms to soar to unprecedented levels of excellence.

Posted in All